Forest Furniture: Making a Log Chair

The other day, as the spinning chain from my gasoline-powered saw bit into a freshly felled maple tree measuring nearly 2 feet in diameter, I remembered some advice once given to me by an old-timer in Maine who is well-known for carving wooden bears with a chain saw.

“It’s easy,” he said. “Just cut away everything that doesn’t look like a bear.”

In my case, I wasn’t sculpting a bear but a chair.

I had seen a model of this seat in a hardware store a few weeks earlier and instantly realized I had to have one. So I raced home, did some online research, bought some tools and went to work.

As you can see from the accompanying video by Day videographer Peter Huoppi, this is not a chair for sitting on in a drawing room while sipping Dubonnet and deciding whether or not to bid three no trump.

Weighing more than 200 pounds, it also isn’t a piece of furniture you would casually point to when inviting a visitor to pull up a chair.

It is a seat that can withstand a Force 9 gale, 6.2 earthquake or the ample dimensions of Shaquille O’Neal.

Best of all, you don’t have to be Thomas Chippendale, or even Paul Bunyan, to make one.

I’m a guy who once spent an entire semester in high school shop class fabricating a lopsided napkin holder, and even though I since have learned a few modest skills I would not consider myself a journeyman carpenter, let alone a skilled woodworker.

I admit to feeling a little hypocritical touting the use of a chain saw and other power tools to fashion my chair, but after my son left for college I no longer had access to labor for my two-man crosscut saw, which we relied on for years to cut all the firewood to heat our home.

These days I continue to cut all our own firewood, but exclusively employ a chain saw.

As for my chair, though I tapped away with a hammer and chisel to remove some of the bark, and smoothed some hard-to-reach gouges with a rasp and hand file, I mostly shaped the wood with an angle grinder and a palm orbital sander. Both are electric-powered.

The version of the chair I first saw was pretty rough-hewn, and if you want that rustic look you don’t need to sand it down after the initial cutting. I went for a slightly smoother finish.

Anyway, if a picture is worth a thousand words, then a video is worth a million, so I’ll let Peter’s work do most of the explaining. Here’s what you’ll need:

1) A tree. In my case, I felt guilty cutting down a maple that had the bad luck to grow right where I will be planting grapes in a couple weeks. I would feel even worse simply burning such magnificent wood for heat. Creating what I hope will be an enduring, heirloom piece of furniture pays proper respect and should allow future generations to appreciate its history.

In addition, one benefit from all the hurricanes, blizzards and windstorms has been a surplus of toppled trees. For people without wood stoves or fireplaces, making a chair is an excellent use of that resource.

After felling the maple I cut a knot-free section about 4 feet long and stood it on end.

Still using the chain saw, I cut a foot-long V-notch with the grain on the butt end, removed the wedge, and then repeated the cut at right angles. This created four stout legs.

Then, I flipped the log over so it stood on its new legs, and made a vertical cut about 2 feet long, starting about 6 inches from the edge and angled slightly toward the middle.

Next, I turned the log on its “back” and sawed across the grain toward the bottom of the vertical cut. When you reach this cut, remove the block of wood and you’re left with a seat, a chair back and four legs, all in one piece of wood.

 

2) If you decide to finish the chair, the best tool to start with is an electric-powered, 4½-inch angle grinder, equipped with a cutting disk that resembles a miniature chain saw. I’m not in the endorsement business, but as far as I can tell only one company, whose products are mostly available online, manufactures these disks, in 14-tooth and 22-tooth models. After consulting with a customer-service representative on the phone I chose the 22-tooth version.

It took a while getting used to this tool, and I always wear Kevlar chaps, Kevlar gloves, a face shield, dust mask and ear protection. I also work outside on the deck because it throws off a haboob of chips and sawdust about 20 feet in every direction. After an hour or so I swept up enough debris to fill two garbage bags, which I’ll eventually use for mulch.

You can use the grinder to remove bark and then shape curves into the back, seat and legs. Next, you can replace the metal cutting disk with a fabric disk backed with sandpaper of varying grits. Start with coarse and work your way up to fine.

I found that by eliminating use a rubber backing disk and simply using the fabric disk offers more flexibility in tight angles.

For an even smoother surface, finish the process with an orbital palm sander.

I’m still uncertain about the final step, treating the chair.

Because the tree was alive at the time of felling it could take months or even years before it is dry enough to apply tung oil, polyurethane or varnish. If you try to speed the drying process you risk creating cracks, checks and warping.

For the time being my chairs – I’ve made four – are outside under an eave so they won’t get water damage while drying slowly.

I think I have enough maple left to fashion a couple more chairs. Then, I suppose, I’ll need hassocks.

And maybe end tables.

I may even get around to making a bear. Or a new napkin holder.

 

 

 

 

Reader Comments

MORE BLOGS

In Waning Winter, An 'Above Par' Snow-Kayaking Adventure

With snow cover stubbornly lingering and whitewater kayaking season still more than a month away, what’s an impatient paddler to do? Easy: Snow-kayaking.

What Snow and Ice? The Maple Sap Is Running!

Every year about this time, after having spent the past few months shoveling tons of snow from the driveway, lugging tons of firewood from the shed, getting out of bed dozens of times at 3 a.m. to stoke the stove, hauling countless buckets of...

Finally! A Worthy Snowstorm -- Maybe Even a Bombogenesis!

Just when we winter worshipers had resigned ourselves to another snowless season, and only a day after the temperature climbed ridiculously into the 60s, our prayers have been answered not just by an ordinary storm but by a meteorological...

Animal Tracks in the Snow: They All Tell a Story

If you thought most forest animals hibernated in winter, or at least slept through the night, take a stroll through the woods the morning after a snowfall.

What Does the Fox Say? Yip-yip-yip! Chance Encounters With Creatures Great and Small

While I lugged logs from the woodshed the other morning a yip-yip-yip! pierced the still air. First reaction: Did the neighbors get a dog? No, they were out of town for a few days. Yip-yip-yip!

Ringling Bros., SeaWorld and the Columbus Zoo: Pitfalls of Keeping Elephants, Orcas and Gorillas in Captivity

Large, wild animals belong in the wild, not in a circus, aquarium or zoo – a point reinforced by events involving three prominent, unrelated institutions in the last couple weeks.

Our Debt of Gratitude to President Obama, the Environmentalist-in-Chief

As we prepare to inaugurate a president who has repeatedly called climate change a "hoax," appointed as Environmental Protection Agency administrator an Oklahoma attorney general who is suing that agency, named the CEO of ExxonMobil as secretary...

Call of the Wild: A Clash Over Cellphones in The Great Outdoors

"Yeah, I’m standing on the summit now! … The view is incredible – I can’t believe I’m getting a signal up here!"

It's the Most Wonderful Time of the Year: Plunging into Icy Fishers Island Sound at the Annual New Year's Day Run-Swim

Look, I’m not going to lie: While some longtime participants in one of southeastern Connecticut’s most enduring, challenging and madcap traditions insist that plunging into icy water after a run on Jan. 1 is a refreshing and...

No Such Thing as Too Much Fun: A Great 2016; Hopes for an Even Better 2017

When it comes to adventurous fun my philosophy has always been too much is never enough, so when I look back at the highlights of the past 12 months, as I typically do when the calendar is about to flip, I can honestly say that 2016 was a...

Hey, Has Anybody Else Noticed It's Gotten A Little Chilly?

I guess I first realized the temperature had dropped a few degrees when I went out for a 5-mile run this morning and noticed that my eyelids had started to freeze shut, which loyal readers will recognize as Level IV on the Fagin Frigidity Index,...

Granola Munchers Vs. Snickers Gobblers: Conflict Over Plans for a Hotel on New Hampshire's Mount Washington

The first time friends and I trudged up New Hampshire’s Mount Washington in winter the frozen peak might as well have been Antarctica – hurricane-force winds and blinding snow battered us, the only climbers that day atop the highest...

How to Build a Stone Wall in 14,863 Easy Steps

I realized long ago that you’re never really finished building a stone wall, even after you’ve dragged and hefted into place what seemed like the final boulder, exhaled mightily and stepped back to admire your work.